Robes Quality Inspection and Gowns Quality Inspection
Robes and Gowns measuring guides
Lay opened garment flat. Measure from one front edge, straight across chest, just below armhole, across back to opposite front edge.
Lay opened garment flat. Measure straight across sweep, from side edge to side edge.
Measure across shoulder from armhole seam to armhole seam at natural fold.
- Across back
Measure from armhole seam to armhole seam at narrowest point.
- Center back length
Measure from neck seam down center back to bottom of garment.
- Belt loop placement
Measure distance from bottom of armhole to top of belt loop.
- Across chest
Lay closed garment flat. Measure from armhole seam to armhole seam at narrowest point.
Measure from natural fold at shoulder, straight across sleeve to bottom of armhole seam.
- Upper arm/Bicep
Lay sleeve flat. Measure from sleeve fold at bottom of armhole, at right angle to sleeve, straight across to opposite sleeve fold.
Lay the sleeve flat. Measure at half inseam as stated in No. 9 upper arm/Bicep
- Cuff Closed
Lay the sleeve flat. Measure straight across cuff from sleeve fold to sleeve fold.
- Sleeve length from side of neck
Measure from neck seam, at shoulder seam join, across shoulder and down sleeve to edge of cuff.
- Sleeve length from shoulder
Measure from top of sleeve head, at armhole seam, down sleeve to edge of cuff.
- Sleeve from center back neck
Establish center back neck. Measure from this point across shoulder and down sleeve to edge of cuff.
- Facing width
Lat facing flat. Measure across facing from front seam to hem about 50cm(20”) from bottom of garment.
- Neck collar length
Lay the collar flat. Measure from left front edge to right front edge following collar seam.
- Belt length and width
Measure belt from end to end and edge to edge.