Sådan laver du kvalitetskontrol af ansigtsmaske til fiskeri?
At bære en ansigtsmaske til fiskeri er ikke kun beskyttelsen mod sol eller vind, det er også ved at blive en modetrend, især under ny koronavirusepidemi. Det er sandsynligt, at dette bliver en forbrugertold, selv når postepidemien kommer. Derfor som en QC for mode, vide, hvordan man udfører fiskeri ansigtsmaske kvalitetskontrol, virker et simpelt produkt, faktisk slet ikke, er mere nødvendig end nogensinde før.
Først og fremmest, vi burde vide, hvordan det er lavet, what processes involved when produce a fishing face mask. We start it from knitted grey fabric. If we start from yarn, it will be much longer. Then we know what are the common problems in the making process and how we can avoid them.
Fishing Face Mask Quality Control
Making a fishing mask usually takes below steps, so as the fishing face mask quality control. Therefore I have also list the common issues in these steps.
- Printing of fabric
Most of fishing face masks are made of digital submission fabric, so for the fabric quality control, the qc must focus on printing faults, such as off shade, or missing printing etc.
- Anti-UV finish
the printed fabric goes to do anti-UV finish, the effect must be test through a lab.
- Cutting
Cutting usually does not cause any problem, if it does not have a mistake.
- Logo print
Then it goes to another printing factory or workshop to print, this time is screen printing for brand or client’s logo. The logo printing must ensure such printing defects as fuzzy pattern or off-register does not happen.
- Air holes punching
Then the panel goes to for laser punching for breathing holes. As the materials are all synthetic materials, only laser punching can ensure it will not unravel.
- Sewing
Lastly, it is sewn in the factory, which includes hemming with lockstitch and joint stitching. The QC should check all stitches are secure and even.
