Beklædningsinspektion

Beklædningsgenstande indsamler forskellige komponenter som stof, sytråde, knapper, trimmer, etc. Kvalitetsstandarden for tøj afhænger af korrekt inspektion af hvert trin i tøjproduktionen. For at opretholde kvalitetsniveauet skal inspicere hvert trin i beklædningsgenstandsproduktionen. Denne procedure er kendt som beklædningsgenstandsinspektion. Tøjinspektion er yderst nødvendig for kvalitetstøj. I beklædningsbranchen, der er 3 stadier af beklædningsinspektion.

Trinnene for beklædningsinspektion er som nedenfor:

1. Stof inspektion:

Det forstår vi alle sammen, tøjets vigtigste råmateriale er stof. The fabric is that the main material for garment manufacturing. That the fabric is inspected terribly rigorously within the fashion industry. Normalt 4.0 points system and 10 points system are used for fabric inspection. Det 4.0 point system is used for higher quality fabric and 10 points system is used for comparative poor quality fabric.

2. In Line Inspection:

The inspection, that is carried out before collecting all the part of a garment is known as in line inspection. In line inspection is additionally called in process inspection. This is often the long inspection method thanks to whole production inspection is finished during this method. Derfor, in line inspection is extremely necessary for garment inspection system.
The in line inspection is carried in following sections:
a.Cutting Section
b.Sewing Section
c.Finishing Section

3. Final Inspection:

Final Inspection is the system that is carried on a whole garment manufacturing. Before this stage, a part of a garment or an incomplete garment is inspected. Så, final inspection is extremely necessary from client purpose of read. Size of clothes fitting and different defects is inspected throughout final inspection. There are numerous systems for final inspection.