Cum se efectuează inspecția costumelor de baie?
Inspecția costumelor de baie este puțin mai dificilă decât inspecția normală a articolelor de îmbrăcăminte, deoarece costumele de baie sunt de obicei cu mai multe detalii. Au mai multe aspecte de inspectat și mai multe măsurători de verificat. Prin urmare, este posibil să pierdeți ceva dacă nu aveți mai multe experiențe de inspecție a articolelor de îmbrăcăminte.
Swimsuit inspection-makes and workmanship checklist
- Dart point MUST be in sample;
- Must have bartack at strap adjustment and back loop;
- Pls ensure that all the hardware are right materials;
- Hygiene sticker must be placed at the crotch;
- Pls ensure that all normal standard are checked and that the spec are within client’s tolerance;
- Ensure that the mesh are in correct position ;
- Pls ensure that the gathers at front finish 7cm up from the leg opening;
- Also ensure that all the measurements are as per spec or within client’s tolerance.
Measurement check
| Nu. | Măsurătorile | Tolerance-/+mm |
| A | Neckline Length | 1 |
| B | Underbust Seam Length | 1 |
| C | 1/2 Waist @ 15cm down from Underarm | 1 |
| D | 1/2 Hip @ Leg Opening | 1 |
| E | Cup Height @ Centre | 0.5 |
| F | Front Armhole Length (sideseam to strap attach) | 0.5 |
| G | Depth @ CF (cup) | 0.3 |
| H | Across Top Back | 1 |
| Eu | Body Length @ CF (underbust seam to gusset seam) | 0.7 |
| J | Body Length @ CB | 0.5 |
| K | Sideseam Length | 0.3 |
| L | 1/2 Leg Opening Relaxed | 0.7 |
| 1/2 Leg Opening Stretched | min | |
| M | Back Width @ 6cm up from gusset seam | 0.7 |
| N | Front Gusset Width (@ 13cm up from Seam) | 0.3 |
| O | Gusset Width @ Narrowest Point | 0.3 |
| P | Back Gusset Seam Length | 0.3 |
| Q | Gusset Length | 0.3 |
| R | Back Straps Apart (to centre of straps) | 0.5 |
| S | Back Strap Length (Incl: 5cm adjustment) | 0.5 |
| T | Strap Width @ Shoulder | 0 |
