Skærresistent handskeinspektion
Skærebestandig handskeinspektion skal forstå, hvordan man forhindrer snitniveauer. Dybest set er der to standarder, der ofte bruges på hovedmarkederne. ANSI / ISEA 105 standard (2016 udgave) handskepriserne A1 til A9, mens A1 handsker er klassificeret til beskyttelse mod letteste vægtkræfter, ANSI niveau 9 handsker klassificeres ved at forhindre tungeste kræfter. Det er vigtigt at bemærke, at den europæiske standard også almindeligt anvendes. EN388 (Europæisk standard) klassificerer deres ratings svarende til ANSI. But they have six clarifications compared to ANSI’s nine. The EN388 ratings differentiates by letters instead of numbers like ANSI’s rating system. They are classified A – F. Level A gloves protect from lightest forces and Level F protect from heaviest forces. Visual cut resistant glove inspection should make sure all prints on gloves, labels, tags are marked in conformity, although you cannot testify the rating is correct.
Fitting test
Fitting test is an important part of visual inspection. Take a suitable pair of gloves and wear them to feel they are comfortable or not to wear, as well as to feel they are flexible enough.
Cut resistant glove inspection-Workmanship and Makes
- If knit construction is right
- If cuff fits properly, rib construction to have proper elastic
- Hemming is good
- No knit defect on fabric, laddering is easy to happening o cuff as it is normally circle knitting.
- Logo print must be colourfast
- Size is correct
