Aprangos gaminių tikrinimo procedūra’ Matavimai

Ką daryti, jei galutinio gatavo užsakymo patikrinimo metu aptiksime matavimus, kurie neatitinka tolerancijos? Pateikta gatavų gaminių išmatavimų tikrinimo procedūra.

Matavimų tikrinimo procedūra:

1. Nurodykite QC inspektoriaus vardą, patikrinimo data ir tiekėjo pavadinimas.
2. Specify the order number, spalva, quantity and delivery date.
3. Specify the sizes that need to be measured, the code (symbol) for every measuring position and measurement in cm (colio).
4. Specify the tolerance limit for every measurement.
5. When going do the measuring, use 12 fields (3 rows and 4 columns) for every size (see Fig.4).
6. Measure the first 4 pieces and if the measurement is correct than mark with √ into the empty field, but if the measurement is bigger or smaller, than mark +/- to show how many cm is the difference than the required one.
7. If there is no measurements out of tolerance, than continue with the next size, but if there are measurements out of tolerance, than measure another 4 pieces from the same size. If there are more pieces with measurements out of tolerance, than repeat the same procedure third time. If there are still peaces with measurements out of tolerance, than after the third time the order needs to be blocked and repaired.
8. The problem should be explained in the field for comments and the possible problem solving solution should be proposed. Until the next inspection, the sign FAIL in the report needs to be marked.