8 seiceálacha cigireachta do mhálaí leathair

Díríonn alt an lae inniu ar liosta na bpríomhthástálacha cigireachta do mhálaí leathair.

8 seiceálacha cigireachta do mhálaí leathair

1. Smell Check

While it should sound funny initially, is cuid thábhachtach de gach iniúchadh an seiceáil boladh: is é an ceann is éasca é (ach is iontaofa) bealach chun tocsainí neamh-incháilithe a fháil amach. Ach is é an bealach iontaofa is tábhachtaí chun é a sheiceáil chun tástálacha ceimiceacha a dhéanamh le linn saotharlainne.

2. Function Check

The objective is to inspect if the merchandise extremely works. Laistigh de chás an mhála leathair, an inspector can wear it and use the zippers.

3. Color fastness check on leather

Excessive dye could also be rubbed off throughout a color fastness check. On leather this is often a frequent issue. The check ought to be repeated ten times with a dry cloth and ten times with a wet cloth.

4. Abuse & Fatigue tests

Pulling on straps and zippers with stronger-than-usual force helps to grasp the producing quality of leather bags.

5. Seam strength check for leather bags

This check is similar to the abuse check however focuses on the seams. It uses “normal” force or a tension gauge to envision seam strength.

6. Load check

The inspector loads the leather bag with weights (depending on the model between two and twenty metric weight unit for backpacks). He then lifts the bag twenty times and hangs it on a hook for four hours.

7. Zipper twisting check

This check tests each the strength of the zipper and therefore the seams holding it. Within the open, middle and closed position, the QC pulls the zipper sideways for ten seconds every direction. Bad quality zippers tend to open and bend on the far side repair.

8. Carton humidness check (for the rainy season)

In order to avoid mould or plant humidness should be below 12%. Particularly throughout rainy season, the inspector ought to check the humidness of the export cartons with a humidness tester. He ought to conjointly make sure that adequate chemical agent is placed within the right spots.