Rõivatoodete kontrollimenetlus’ Mõõdud

Mis siis, kui valmis tellimuse lõpliku kontrolli käigus tuvastame tolerantsist väljas olevad mõõtmised? Valmistoodete mõõtmiste kontrollimise protseduur on esitatud viitamiseks.

Mõõtmiste kontrollimise kord:

1. Täpsustage kvaliteedikontrolli inspektori nimi, kontrolli kuupäev ja tarnija nimi.
2. Täpsustage tellimuse number, värvi, kogus ja tarnekuupäev.
3. Määrake suurused, mida tuleb mõõta, kood (sümbol) iga mõõteasendi ja mõõtmise kohta cm (tolline).
4. Määrake iga mõõtmise tolerantsi piir.
5. When going do the measuring, use 12 fields (3 rows and 4 columns) for every size (see Fig.4).
6. Measure the first 4 pieces and if the measurement is correct than mark with √ into the empty field, but if the measurement is bigger or smaller, than mark +/- to show how many cm is the difference than the required one.
7. If there is no measurements out of tolerance, than continue with the next size, but if there are measurements out of tolerance, than measure another 4 pieces from the same size. If there are more pieces with measurements out of tolerance, than repeat the same procedure third time. If there are still peaces with measurements out of tolerance, than after the third time the order needs to be blocked and repaired.
8. The problem should be explained in the field for comments and the possible problem solving solution should be proposed. Until the next inspection, the sign FAIL in the report needs to be marked.