8 kontrole kontrolne toreb skórzanych
Dzisiejszy artykuł skupia się na liście głównych testów kontrolnych toreb skórzanych.
8 kontrole kontrolne toreb skórzanych
- Smell Check
While it should sound funny initially, kontrola zapachu jest ważną częścią każdej inspekcji: to jest najłatwiejsze (ale najmniej wiarygodne) sposób na odkrycie nieodpowiednich toksyn. Ale przede wszystkim niezawodnym sposobem sprawdzenia tego jest wykonanie testów chemicznych w laboratorium.
- Function Check
The objective is to inspect if the merchandise extremely works. W przypadku skórzanej torby, an inspector can wear it and use the zippers.
- Color fastness check on leather
Excessive dye could also be rubbed off throughout a color fastness check. On leather this is often a frequent issue. The check ought to be repeated ten times with a dry cloth and ten times with a wet cloth.
- Abuse & Fatigue tests
Pulling on straps and zippers with stronger-than-usual force helps to grasp the producing quality of leather bags.
- Seam strength check for leather bags
This check is similar to the abuse check however focuses on the seams. It uses “normal” force or a tension gauge to envision seam strength.
- Load check
The inspector loads the leather bag with weights (depending on the model between two and twenty metric weight unit for backpacks). He then lifts the bag twenty times and hangs it on a hook for four hours.
- Zipper twisting check
This check tests each the strength of the zipper and therefore the seams holding it. Within the open, middle and closed position, the QC pulls the zipper sideways for ten seconds every direction. Bad quality zippers tend to open and bend on the far side repair.
- Carton humidness check (for the rainy season)
In order to avoid mould or plant humidness should be below 12%. Particularly throughout rainy season, the inspector ought to check the humidness of the export cartons with a humidness tester. He ought to conjointly make sure that adequate chemical agent is placed within the right spots.
